IMPORTANT:
All surfaces where RepairPatch is to be applied should be dry,
free of any loose material, dust, oil, grease, and wax. Some
surfaces may require a sealing coat or filler prior to the
application of RepairPatch.To
apply Repair Patch, peel off the coloured protective film.
Attach RepairPatch to the substrate, apply firm pressure to
secure a good bond, then expose to ultraviolet light (daylight or
lamp) to cure and harden.
|
- ● RepairPatch is safe to
use as it requires no mixing of dangerous or messy chemicals.
|
|
● RepairPatch is clean, safe, easy to use and
convenient. |
|
● Curing of RepairPatch is by exposure to ultraviolet light
either daylight or artificial UV light using a lamp. |
|
● In its uncured state RepairPatch is soft and pliable and
can be cut, with a knife or scissors, moulded, wrapped, or laid onto
almost any prepared substrate surface to produce an instant bond. |
|
● RepairPatch is an ideal material for almost any substrate
as there is virtually no shrinkage. |
|
● Following curing, RepairPatch is immensely strong and will
withstand UV degradation unlike normal GRP. |
|
● RepairPatch is rot proof, resistant to adverse weather
conditions, most acids, solvents, impact and abrasions. |
|
● Once cured RepairPatch can be sanded, drilled, screwed or
painted for a permanent professional finish. |
|
RepairPatch
The convenient, rapid & permanent repair |
